CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Coriolis force

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 29, 2004, 09:32
Default Coriolis force
  #1
Saturn
Guest
 
Posts: n/a
Hi, I used FLUENT to simulate the water into sink. Could FLUENT simulate the Coriolis force??
  Reply With Quote

Old   September 29, 2004, 10:34
Default Re: Coriolis force
  #2
sam
Guest
 
Posts: n/a
coriolis forces are invloved in rotating reference frame and fluent does simulate these forces

  Reply With Quote

Old   September 29, 2004, 14:35
Default Re: Coriolis force
  #3
Titiksh Patel
Guest
 
Posts: n/a
Hi

But cariolis forces dose not make much effect in sink as scale level are very small. The way the water goes down into the sink depends on initial presence of eddies or turbulence.

Acc. to me it may go down clockwise or anticlockwise.

Cariolis force comes when there are large scale such as oceans, atmosphere winds, etc.

Regards, Titiksh
  Reply With Quote

Old   September 29, 2004, 19:11
Default Re: Coriolis force
  #4
Chetan Kadakia
Guest
 
Posts: n/a
I do believe there is a difference based on Coriolis forces. When you flush a toilet, the direction is dependent on the hemisphere. I believe you will have the same situation for sinks. Am I incorrect?
  Reply With Quote

Old   September 30, 2004, 05:35
Default Re: Coriolis force
  #5
Titiksh Patel
Guest
 
Posts: n/a
Hi Chetan,

Ya, I think its been practiced all round the world, but still I am not sure whether the theory goes right in the flushing.

Regards, Titiksh
  Reply With Quote

Old   September 30, 2004, 15:56
Default Re: Coriolis force
  #6
NeOmega
Guest
 
Posts: n/a
The direction the toilet flushes depends entirely on the way the stream is forced out. It is forced out at an angle to give a swirl. The coriolis effect on toilet flushing is an urban myth.

Coriolis effect only applies to large scale observations.

Over time, the right rail in the (Northern Hemisphere) of a train track gets worn down faster, and the right side of river beds is deeper.

But small things like water going down a drain, are not effected in any measurability by the Coriolis effect.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
coriolis force in MRFSimpleFoam renyun0511 OpenFOAM Running, Solving & CFD 2 October 28, 2013 07:27
Force can not converge colopolo CFX 13 October 4, 2011 22:03
User-defined force transfer across FSI interface vivekcfd CFX 7 March 10, 2010 20:43
DEFINE_CG_MOTION and pressure force Teo Fumagalli FLUENT 0 April 11, 2008 10:25
MRFZonesC questions what is the mesh_V and why only Coriolis force no centrifugal force waynezw0618 OpenFOAM Running, Solving & CFD 49 April 8, 2008 04:23


All times are GMT -4. The time now is 22:07.