CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

wall boundary conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 4, 2004, 13:36
Default wall boundary conditions
  #1
sourav
Guest
 
Posts: n/a
when u set the wall boundary conditions,by default the temperature(for the constant temperature condition) is set to a certain value. I want to set the convection boundary conditions(specifying the external heat tranfer coefficient).

in that case does it override the constant temperature condition.

what if I set values for both const.temp,and also specify an external heat transfer coefficient.which condition will FLUENT acept
  Reply With Quote

Old   October 24, 2004, 21:38
Default Re: wall boundary conditions
  #2
Geng Tian
Guest
 
Posts: n/a
I'd like to see the wall boundary conditions,

Thanks alot
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wall functions and boundary conditions in OF 1.7.1 cristobal OpenFOAM 2 May 6, 2011 04:10
Wall modelling and boundary conditions: why specify value for turbuelnce quantities? djbungee OpenFOAM Programming & Development 2 July 30, 2010 07:32
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
Wall boundary conditions for 3d-cylinder Martin Bellmann FLUENT 1 July 11, 2008 13:04
Boundary conditions? Tom Main CFD Forum 0 November 5, 2002 02:54


All times are GMT -4. The time now is 13:21.