CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Attention on simulation of microreactor

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 27, 2004, 00:52
Default Attention on simulation of microreactor
  #1
TAMO2(from Japan)
Guest
 
Posts: n/a
If you simulate microreactor using VOF, you should be careful as follows;

if you set Courant number = 1, time step should be smaller than sqrt( dx^3 * density / surface_tension )

here dx:minimum mesh size
  Reply With Quote

Old   September 13, 2004, 19:01
Default Re: Attention on simulation of microreactor
  #2
Janice
Guest
 
Posts: n/a
Hi, Tamo2:

What kind of problems are you working on in microreactors? I am working on 3D VOF in microreactors and got some problems. I need some helps, probably you are the best one.
  Reply With Quote

Old   October 6, 2004, 01:01
Default Re: Attention on simulation of microreactor
  #3
TAMO2(from Japan)
Guest
 
Posts: n/a
I'm working on in MR as follows; (1) In Spiral MR, liquid-liquid and gas-liquid VOF model. (2) Laminar flow reaction.

And,I don't have good ideas about (2) avoiding numerical diffusion.
  Reply With Quote

Old   October 6, 2004, 11:08
Default Re: Attention on simulation of microreactor
  #4
Janice
Guest
 
Posts: n/a
I think that we are working on the same area. Probably we can disscuss some issues together.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Which CFD code for aerosol simulation Andrea Panizza Main CFD Forum 6 February 17, 2023 14:44
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 11:44
GUI crash and simulation engine still running RPJones FLOW-3D 2 November 9, 2010 09:18
velocity profile export from a simulation onto another sudhirlv STAR-CCM+ 1 September 12, 2010 19:57
strange simulation error Ralf Schmidt FLUENT 2 May 4, 2007 14:02


All times are GMT -4. The time now is 05:09.