CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

problem with walls

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 11, 2004, 12:40
Default problem with walls
  #1
stk
Guest
 
Posts: n/a
Does anybody knows for example in a piston movement, when the piston reaches the cells adjacent to the wall, to avoid negative volume detection, what i have to do (and then when the piston goes away the adjacent cells will reappear)???? thanks for your time
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
[ICEM] [FLUENT] 2D Geometry problem when exporting to Fluent - Unwanted walls MikeTichondrius ANSYS Meshing & Geometry 1 February 9, 2011 14:31
ICEM Tetra mesh, Size reduction and Skewness problem Catthan ANSYS Meshing & Geometry 6 December 5, 2010 20:39
Can I solve this problem by Fluent? Kai_kc FLUENT 1 October 27, 2010 05:29
Problem about FLUENT-MPCCI-ABAQUS FSI simulation! whpsoft FLUENT 0 May 24, 2006 10:22


All times are GMT -4. The time now is 00:21.