|
[Sponsors] |
what boundary do I choose for the counter-flow ? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 20, 2004, 05:44 |
what boundary do I choose for the counter-flow ?
|
#1 |
Guest
Posts: n/a
|
There are two kind fluids in my system and the system is the counter-flow. The one fluid inputs at the bottom boundary of the geometer and leaves at the top boundary. The another one inputs at the top boundary and leaves at the bottom. What boundary do I choose for the top and bottom boundary ? Thanks for your response.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Domain Imbalance | HMR | CFX | 5 | October 10, 2016 05:57 |
Boundary condition problem for open channel flow | Andy | CFX | 9 | June 11, 2016 07:20 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Supersonic flow past a wedge with counter flow | Mahesh Bailakanavar | FLUENT | 0 | February 14, 2008 00:21 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |