CFD Online Logo CFD Online URL
Home > Forums > FLUENT


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 22, 2004, 16:55
Default DPM
Posts: n/a
I have question about DPM model. Hope someone can help me.

I create one injection, single, inert, diameter is 1.78e-6m, mass flow rate is 7.969e-11 kg/s. The number of particles should be 10,000 if number = mass flow rate /mass of a particle.

After the uncoupled calculation converged, I checked Report - Discrete Phase - summary. It only shows there is one particle. Total number of parcels : 1 Total number of particles : 1.000000e+00

Why? Thank you in advance. Tom
  Reply With Quote

Old   October 22, 2004, 18:48
Default Re: DPM
Posts: n/a
Hello Tom,

When you specify "single" in the "injection type"....there will be only one particle and the mass flow rate you specified is inappropriate(not considered). If you want 10,000 particles specify "group" for the injection type in "Set Injections Properties" panel and your mass flow rate should be total mass flow rate/ number of particles. Hope this helps.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
DPM and UDS mighelone FLUENT 0 June 3, 2011 07:27
DPM modeling Mohsin FLUENT 0 March 31, 2010 22:11
DPM - do the particles affect the liquid? Nikhil Dani FLUENT 0 January 1, 2009 12:58
slow after mesh for enhanced wall treat DPM joshkemp FLUENT 0 May 1, 2007 17:20
compatibity LES with DPM Alex Munoz FLUENT 0 March 26, 2003 22:13

All times are GMT -4. The time now is 01:59.