CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Gambit and fluent problem (http://www.cfd-online.com/Forums/fluent/34972-gambit-fluent-problem.html)

Rezassp November 2, 2004 01:05

Gambit and fluent problem
 
I have two model . all details of two model is similar, dimensions , boundry condition type and value .but answers of models are different . models are drawing and meshing in gambit and analysis in fluent

Ammu November 2, 2004 02:09

Re: Gambit and fluent problem
 
The meshing may be different. Check the number of cells in both. The mesh has to be made finer and finer till there is no more changes in the answers. Then we have a grid independent solution. We are supposed to reach there to get a correct result.

venugopal November 2, 2004 05:59

Re: Gambit and fluent problem
 
if you using different type of fluent versions, there will be some change in answer. And also number of cells will differ the answer.


All times are GMT -4. The time now is 16:44.