CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

please help! HOW TO ADD GRADUALLY THE PRIMARY PHAS

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 17, 2004, 07:54
Default please help! HOW TO ADD GRADUALLY THE PRIMARY PHAS
  #1
Enrico
Guest
 
Posts: n/a
Hi friends ,

I am using VOF model with 2 phases ,in which one phase is added gradually over a surface ,(say, like in evaporation or condensation )...

I want to model this by adding CUBIC elements of that phase (Gradually JUXTAPOSITION of those cubic elements ....) -In VOF equation there is a source term which is used to add or remove a phase ...

should I write UDF for this?? please can some body help me to solve this problem ?

thanks in advance
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to add a source term (body force) to icoFoam? chris Liu OpenFOAM Programming & Development 4 October 27, 2014 16:38
Extract primary phase thread in VOF with 3 phases Eric FLUENT 2 July 7, 2011 03:22
How to add temperature to cavitatingFoam solver chodki-c OpenFOAM 9 September 30, 2010 12:21
Add Measure Markings or Coordinates to the Contour Colin FLUENT 4 August 25, 2004 10:54
How to add fire source in STAR-CD?? raymond Siemens 2 February 22, 2002 14:49


All times are GMT -4. The time now is 06:51.