CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Using Radiation model S2S

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 18, 2004, 05:28
Default Using Radiation model S2S
  #1
ssendai
Guest
 
Posts: n/a
hi Using the "S2S" of Radiation model to calculate radiaon in a closure, the following msg.are showed: " maximum iterations exceeds in radiation calculations.

radiosity unconverged after 1 iterations."

In S2S,iteration parameters are flow iteration per radiation iteration 10 sweep:1 tolerance: 0.001

if you have some ideas, pls mail me.

thank you very much!

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 18 March 3, 2015 06:36
How model radiation of both solid wall and fluid£¿ Harry Qiu FLUENT 2 February 4, 2013 00:04
how to write and read view factor file in radiation model S2S chhanwal FLUENT 1 March 25, 2009 11:54
radiation model brian FLUENT 0 July 27, 2007 10:57
RE: Radiation model Ashutosh Joshi FLUENT 1 January 30, 2001 11:50


All times are GMT -4. The time now is 16:31.