CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

High surface temp. oscillating flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 19, 2004, 10:20
Default High surface temp. oscillating flow
  #1
UNAL
Guest
 
Posts: n/a
Hello. I m studying oscillating flow in vertical annular gap with VOF model. There are two fluids (phases)in the gap which is water and air. The gap filled with water a known level and opened the top end of the gap to atmosphere. I have interface between water and air or free boundary. The fluid is moving oscillatory motion in the gap and exposed to constant heat flux by a heater at wall section. The heater contact with two phases simultaneously.The heater surface temperature is normal contact with water but the air contact section surface temperature not normal, this section surface temp.is very high for example 1000K my interval is 350 K. Why the air section is very high, How can I correct it, What is your opinion to decrease normal level, help please?!!!......,
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thermocapillary free surface flow zakifoam OpenFOAM Running, Solving & CFD 10 December 12, 2016 12:44
[OpenFOAM] How to calculate the fluid flow through a surface lynx ParaView 4 January 20, 2016 12:58
[Gmsh] Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan OpenFOAM Meshing & Mesh Conversion 3 October 22, 2015 12:05
[Gmsh] Problem with Gmsh nishant_hull OpenFOAM Meshing & Mesh Conversion 23 August 5, 2015 03:09
Problem with Convergence at high flow rates Syed Siemens 1 April 10, 2007 16:18


All times are GMT -4. The time now is 04:38.