CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Cd of cube

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 25, 2004, 15:00
Default Cd of cube
  #1
Naga
Guest
 
Posts: n/a
Hello.

I'm trying to test Cd of a cube but I get negative value! The one I get is around -0.03. It should be around 1.05 at Re=10^4 - 10^6. The following is the geometry of my cube, modeled with Gambit.

Re= 3422.9395 Length= 1m Area= 1m^2 (Each edge of cube has 1m length.) V= 10m/s Density of flow=1.225 (air)

I think I set proper reference values.

A brick (flow area) is 10m*30m*10m and the cube is put 10m from the inlet, 20m from the outlet. Boundary condition of inlet is 'velosity-inlet (v= 10m/s' and for outlet I choose 'outflow'.

If anyone could help me, please let me know. Thank you very much for your reading.

Nagaru
  Reply With Quote

Old   November 25, 2004, 15:33
Default Sorry
  #2
Naga
Guest
 
Posts: n/a
Sorry, Re=684587, Not3422.9395
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Explosion inside a cube - blockMesh shangzung OpenFOAM 3 March 6, 2013 04:59
[ICEM] Icem Geometry creation strategy for hollow cube tony00 ANSYS Meshing & Geometry 1 March 16, 2011 12:05
Gambit help: Cube inside cube Jack Martinez FLUENT 13 August 11, 2010 07:29
drag calibration for cube ga5aq Phoenics 7 July 15, 2010 09:18
gmsh: Inner cube in outer cube shangzung OpenFOAM 1 October 7, 2009 07:14


All times are GMT -4. The time now is 01:13.