CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Two Processor Fluent Prob

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 26, 2004, 01:25
Default Two Processor Fluent Prob
  #1
zxaar
Guest
 
Posts: n/a
reading a mesh with multiple zone names into fluent is been a prob. for small cases if one faces such prob this fix could help.

procedure is as follows

1. read the mesh file into single FLUENT

2. make partition

go to Parallel - Partition

put number of CPU as you would like to use.

click Partition 3. save the file 4. read the file of above in FLUENT with parallel

hope this helps
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
1st prob: code 123 error | 2nd prob: max. packing Ferzola CFX 0 November 21, 2008 13:43
Prob Plot Results Limit CK FLOW-3D 1 November 10, 2008 19:13
regarding moving boundary prob sunil Main CFD Forum 3 March 16, 2008 09:56
gambit meshing prob paul FLUENT 2 March 13, 2008 09:22
multi domain heat transfer prob mohammed zubair CFX 1 June 27, 2006 09:30


All times are GMT -4. The time now is 23:15.