CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Modifing grid in Gambit maintaining BC in Fluent (http://www.cfd-online.com/Forums/fluent/35301-modifing-grid-gambit-maintaining-bc-fluent.html)

DavidS December 17, 2004 04:16

Modifing grid in Gambit maintaining BC in Fluent
 
Im quite new in Fluent. How can i do to modify my mesh in Gambit and come back in Fluent keeping up the boundary conditions, solver options, viscous options, operating conditions... Thanks a lot

HP December 21, 2004 02:53

Re: Modifing grid in Gambit maintaining BC in Flue
 
I think that the best way is to save a file with your inputs (bc's, models, etc.), then modify your grid keeping the same names for your zones (inlets, outlets, etc.). After that open in FLUENT your old cas and dat files, and select the read cas menu command. There you must select the modified grid file. Afterwards you read the bc-file that you had saved.

Notice: In order to save a bc-file use the file/write-bc TEXT command (not menu command), and the file/read-bc to read respectively.

I think that the above will solve your problem.

Regards Ilias


All times are GMT -4. The time now is 09:00.