CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Turbulence model for turbine blade cooling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 20, 2004, 09:30
Default Turbulence model for turbine blade cooling
  #1
CFD Student
Guest
 
Posts: n/a
Dear Fluent Gurus,

I work on a special topic regarding the turbine blade cooling in gas turbines. However, since I am quite new to Fluent, I believe I need considerable help about determining the turbulence model that suits the best for my case.

In my (3-D) case, I modeled the turbine blade as a flat plate of finite thickness and length including 11 holes (at %25 chord location) injecting cool air at 6 m/s. Around the blade, hot air flows at 10 m/s. From my past experiences on external turbulent flows (using another Solver), I believe standart k-e model woks well for my case. However, I appreciate any help/idea to determine the best model (to be used with Fluent).

Best regards.

CFD Student
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
question about turbulence model selection and sensitivity karananand Main CFD Forum 1 February 26, 2010 05:41
Centrifugal Pump and Turbulence Model Michiel CFX 12 January 25, 2010 04:20
turbulence model equation Andy Chen FLOW-3D 4 January 1, 2010 22:45
Turbulence model Herry Phoenics 1 May 29, 2003 13:19
turbulence model question Jason Wei Main CFD Forum 1 May 6, 2003 00:45


All times are GMT -4. The time now is 13:09.