CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

powder injection

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 2, 2005, 05:31
Default powder injection
  #1
O.B
Guest
 
Posts: n/a
Laser cladding by powder injection is a deposition technique using a coating material in form of powder particles and laser beam .The laser beam heats the substrate strongly enough to melt it locally ,and powder particles are blown in the melting pool . Laser cladding with powder injection methods starts with the formation of a melt pool in the substrate in which cladding powder is being fed. Thus a clad layer is formed almost instantaneously. I haven't a problem with the moving heat source; my problem is how to put the powder in the melt pool. Thanks.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Particle injection boundary condition fjalil CFX 8 September 23, 2009 10:40
surface injection or point injection? sukura_1984 FLUENT 0 September 2, 2009 10:26
On DPM injection properties. akr FLUENT 4 October 23, 2006 11:54
DPM, UDF, Injection Type Zhang FLUENT 0 June 8, 2005 16:51
using injection file and parallel process Cindy Jones FLUENT 0 January 23, 2003 13:40


All times are GMT -4. The time now is 04:43.