CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Appreciate for your any answer

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 13, 2005, 22:59
Default Appreciate for your any answer
Posts: n/a
For a gas-solid two-phase flow, there are 10 components in the gas phase and chemical reactions take place among the components. Is Fluent able to model such kind of system with flow and reactions? Your any answer is highly appreciated.

  Reply With Quote

Old   January 16, 2005, 20:20
Default Re: Appreciate for your any answer
Posts: n/a
Why no answer at all? Isn't there anybody here to do simulation for multihpase flow with chemical reactions? Or is it beyond the ability of Fluent? I need your reply for helping me to make a decision whether to apply Fluent? Thank you anyway.


  Reply With Quote

Old   January 20, 2005, 07:01
Default Re: Appreciate for your any answer
Posts: n/a
Hi Klawu, Fluent can do such simulations but not simultaneously. I mean you will not be able to use a multiphase flow model and Fluent's reaction model simultaneously. you will have to establish flow pattern (cold flow simulation) first and then use User Defined Scalar (UDS)for defining your reaction source terms. as far as I know, Fluent 6.2 will have the capability to simulate flow and reaction/s simultaneously. as a caution, you may look at memory requirements though. Fluent's User Manual will be the best guide for your questions.

Best of luck!

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
ACRi ANSWER analogs dmishe Main CFD Forum 0 May 17, 2011 05:19
Answer Yes or No. Shim FLUENT 0 February 29, 2008 11:31
To red lemon pls answer K.Baker FLUENT 0 August 2, 2007 09:41
does anyone answer or give some comment about my questions??? Z. Chang Main CFD Forum 7 May 9, 2000 10:15
Has anyone heard of ANSWER code? J. Garroni Main CFD Forum 0 September 15, 1999 09:10

All times are GMT -4. The time now is 06:04.