CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

The BC loss

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 14, 2005, 01:05
Default The BC loss
  #1
Jackie
Guest
 
Posts: n/a
Hi all ,

I have a problem in modeling a rotating hot cylinder in a box (2D). I specify a cylinder surface as wall in Gambit but after export mesh. it's appear that this BC was not found in my BC lists in Fluent. How do I fix this problem ?, anybody help me please.

Jackie
  Reply With Quote

Old   January 17, 2005, 08:03
Default Re: The BC loss
  #2
Jason
Guest
 
Posts: n/a
So you modeled it as a 2D problem, did I get that correct? If so, when you attached your BC it should have been attached to the edge (making sure the solver was set to Fluent 5/6), and when you exported your mesh you have to make sure to check the "Export 2D X-Y mesh" That might not be the exact wording, but it's a checkbox just under the filename box in the export mesh dialog window.

The only other thing I can think of is that there were two edges right on top of one another, and one of them wasn't connected to the mesh, and that's the one that you assigned the BC to.

If this doesn't help, then when you export the mesh, read the status window to see if there are any warnings or errors.

Hope this help, and goodluck Jason
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
loss calculation in simulation of turbomachines playmaster Main CFD Forum 0 August 21, 2010 06:59
SimpleFoam TotalPressure loss prapanj OpenFOAM Running, Solving & CFD 1 July 30, 2009 12:09
Mass loss! So what? jinwon park Main CFD Forum 13 May 22, 2008 10:29
How to deifmne head loss co effcint ? Angelina FLUENT 1 February 8, 2006 10:41
How to deifmne head loss co effcint in cfx? Angelina CFX 4 February 7, 2006 14:14


All times are GMT -4. The time now is 11:24.