CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   fluidized bed drynig modelling(wet solid+gas) (http://www.cfd-online.com/Forums/fluent/35469-fluidized-bed-drynig-modelling-wet-solid-gas.html)

masood yooceframandi January 14, 2005 11:36

fluidized bed drynig modelling(wet solid+gas)
 
i wanna to simulate fluidized bed dryer in fluent.i have a vertical cylinder which have a perforated plate at down.wet solid enter to the cylinder at top of that and gas enter the cylinder from down(perforated plate).the gas passes through wet solid and fluidizes that.wetness of wet solid evaporates and enter to the gas.this process is continious. now,i dont know,who to use fluent for modelling of solid media(porous media).can fluent model both of the gas and solid?or can i use porouse media as a "source term" for gas governing equations? which version of the fluent can do that?and is there any tutorial for that?(fluidized bed) king regards

CFD sage January 18, 2005 08:48

Re: fluidized bed drynig modelling(wet solid+gas)
 
You can try MFIX is free, lite and powerful, you will need a frotran compiler, check it out at www.mfix.org!!!

yooceframandi January 18, 2005 12:55

Re: fluidized bed drynig modelling(wet solid+gas)
 
i use fluent,is the MFIX an ability of fluent?how can i use MFIX in fluent?


All times are GMT -4. The time now is 00:26.