CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Moving(dynamic) mesh in Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 24, 2005, 21:16
Default Moving(dynamic) mesh in Fluent
  #1
yonghyun
Guest
 
Posts: n/a
Hi. guys.

I am looking for theory about moving mesh(boundary) used in Fluent.

I have a fluent manual, but it is just for Vol. 1 and 2.

As I know, the moving mesh part is added in Fluent V6.

Would you let me know the theory? or would you give me manual for Fluent V6 included moving mesh(boundary)?

Thank you.
  Reply With Quote

Old   January 25, 2005, 15:50
Default Re: Moving(dynamic) mesh in Fluent
  #2
Shuto
Guest
 
Posts: n/a
Hi Yonyhun,

If you are already using Fluent 6.0 or higher then you should have an electronic copy of the documentation, if not the manuals are available for registered users through this link:

http://www.fluentusers.com/fluent6/doc/ori/index.htm

If you are not already using Fluent and are curious about its capabilities then check out the company website and search for relevant articles, try this for starters:

http://www.fluent.com/about/news/new...02v11i2/a1.htm

If you still can't find enough info then contact the company directly, I'm sure they'll be happy to discuss the software in a little more detail.

Shtuo.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent converting 'wall' to 'interior' BC for hybrid mesh DarrenC FLUENT 6 November 6, 2014 06:00
Can anybody tell me what does fluent do using MESH MOTION? enry FLUENT 0 October 6, 2010 12:54
Fluent: Mesh Adaption based on Gradient enigma FLUENT 4 July 15, 2010 17:36
mesh for fluent 12 hsn ANSYS Meshing & Geometry 4 September 17, 2009 14:54
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 03:47.