CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

import 3D I-DEAS mesh in Fluen

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 27, 2005, 12:16
Default import 3D I-DEAS mesh in Fluen
  #1
Francesco Di Maio
Guest
 
Posts: n/a
Hi, I am trying to import in Fluent a 3D mesh (very simple) generated using gmsh and saved in I-DEAS format (*.unv). However, the Fluent fe2ram utility (fe432.exe) set to zero all the z-coordinates of the points in the Rampant file.

I have also tryed from DOS prompt the command

"fe432.exe -tIDEAS -d3 -oRAMPANT mesh.unv"

with the same result.

If I write manually the correct z-coordinates in the Rampant file, all is ok, so I am sure this is the unique (!!) error . Is this a bug of the utility fe2ram ?

Is there another method to import a mesh generated by gsmh in Fluent ?

Thanks for any help or suggestions.

Francesco
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 07:42
Unable to import mesh on the CFX-Pre jarrai CFX 1 December 20, 2010 08:05
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 20:43
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
CFX mesh import from ICEM (Windows) Andrew CFX 7 July 6, 2006 12:39


All times are GMT -4. The time now is 06:05.