floating point error: divide by zero
Hi all, I receive back a "floating point error: divide by zero" when launching a graphical visualization of any kind of graphical data with Fluent. I'm running a 6.0 Fluent on a Intel centrino mounting an ATI mobility 9700. Any suggestion? Thanks guys. John Peterandrews
|
Re: floating point error: divide by zero
Try to change OpenGl options on your 3D graphic card (from your desktop "advenced options"). You should turn it to "quality". I had the same problem and now I fixed it!
|
floating point error: divide by zero
Hi I receive a "floating point error: divide by zero" when launching a graphical visualization of any kind of graphical data with Fluent. I'm running a 6.0 Fluent on a pentium 4 mounting an ATI mobility Radeon 9700 I tried to change openGL options but I have the problem yet.How can I do?
|
Re: floating point error: divide by zero
Try this...
Type in the following command line when launching Fluent.... (go to start, then run, then type this) fluent -driver msw I had a similar problem... Hope this helps... Andrew |
Re: floating point error: divide by zero
Hi I receive a "floating point error: divide by zero" when launching a graphical visualization of any kind of graphical data with Fluent. I'm running a 6.1 Fluent on a pentium 4 mounting an ATI mobility Radeon 9700 I tried to change openGL options but I have the problem yet.Besides,I launched Fluent and I tried with command line "fluent-driver msw" I had invalid command.How can I do?
|
Re: floating point error: divide by zero
Hi! I had the same problem: try to download the latest Catalyst version on the ATI web site. Bye G
|
hi
first try another simulation to see if its from the problem or your computer. try same simulation on another computer, a friend say, and see if it persists or no? |
Floating mesh
Hello
i am having floating error : invalid code problem in my thesis. I am working on train passing through tunnel. Can any body help me. My email is sheikhnasir39@gmail.com |
change under
I faced the same problem but changing the under-relaxation factors solved it.
|
All times are GMT -4. The time now is 19:19. |