CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

need help with Gambit to solve a project

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 1, 2005, 19:24
Default need help with Gambit to solve a project
  #1
Augusto
Guest
 
Posts: n/a
I am trying to mesh a flap positioned on a flat surface inside a wind tunnel. I am not able to create the meshing for fixed position of the flap. Furthermore I would like to do the dynamic meshing with the flap free to move from zero to 90 degrees. Can anybody offer help to solve the above problem? Best regards Augusto
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting Fluent mesh files to Gambit neutral files samuelkc ANSYS Meshing & Geometry 5 July 24, 2013 08:02
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing David-CFD ANSYS Meshing & Geometry 1 April 1, 2011 05:22
between IDL Gambit and rhino, any help? philip FLUENT 0 June 23, 2005 12:08
Gambit batch - kill "Startup" box how? Chris Bailey FLUENT 2 February 23, 2005 10:05
3-D Mesh Check in Gambit..... SHR FLUENT 4 March 25, 2003 04:10


All times are GMT -4. The time now is 00:18.