CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

help with grid zones

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 4, 2005, 13:46
Default help with grid zones
  #1
csertoi_aurel
Guest
 
Posts: n/a
Guys,

I have the following problem. Got an imported grid in Plot3D fromat, inported into Gambit. Wanted to define a zone (later on BC in Fluent) on certain elements (which is part of a face but it is not the whole face). I.e. wanted to define 2 separate zones on a face. Is it possible or I can just define a zone on a geometric entity? When I try to split the face using the split of meshed faces it errors out.

Thanks in advance
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
grid check failed due to the merged zones biksham FLUENT 0 February 20, 2008 23:31
Require help in "Merging Grid Zones" Nitesh Goyal FLUENT 0 June 13, 2007 10:25
GRID TO GRID INTERPOLATION in FLUENT calogero FLUENT 3 June 4, 2003 08:32
Combustion Convergence problems Art Stretton Phoenics 5 April 2, 2002 05:59
Troubles modelling flow through a grid Hans Klaufus CFX 1 June 28, 2000 16:43


All times are GMT -4. The time now is 22:07.