CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

mass transfer in fluent!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 12, 2005, 14:23
Default mass transfer in fluent!
  #1
masood yooceframandi
Guest
 
Posts: n/a
hi anybody! what is the mass transfer model in fluent?is it the species model?and which version of fluent is better for mass transfer modelling?

regards
  Reply With Quote

Old   February 13, 2005, 09:05
Default Re: mass transfer in fluent!
  #2
ap
Guest
 
Posts: n/a
The mass transfer model is known as "species transport model" in FLUENT.

In FLUENT 6.1 it's only possible to model species transport in single-phase flows or using the DPM model, while you can't model mass transfer in multiphase models.

Regards, ap
  Reply With Quote

Old   February 14, 2005, 04:50
Default Re: mass transfer in fluent!
  #3
masood yooceframandi
Guest
 
Posts: n/a
dear ap! thank you for reply. i want to bye fluent 6.2.can it do mass transfer (without chemical reaction) for fluidized bed? regards,masood
  Reply With Quote

Old   February 14, 2005, 13:51
Default Re: mass transfer in fluent!
  #4
Robin
Guest
 
Posts: n/a
Hi Masood,

You should have a look at ANSYS CFX-5 for your application. CFX supports mass transfer between muliple phases and has specific fluidized bed models.

Regards, Robin
  Reply With Quote

Old   February 14, 2005, 15:27
Default Re: mass transfer in fluent!
  #5
ap
Guest
 
Posts: n/a
Yes, it will be able to. You can find the new features at www.fluent.com

Regards, ap
  Reply With Quote

Old   February 14, 2005, 16:48
Default Re: mass transfer in fluent!
  #6
arashshahin
Guest
 
Posts: n/a
hi masood are you iranian? where are you? can you help me about some problem in complicated model for meshing in gambit and then give boundary condition to that thank you arash shahin
  Reply With Quote

Old   February 15, 2005, 03:37
Default Re: mass transfer in fluent!
  #7
masood yooceframandi
Guest
 
Posts: n/a
Dear Robin, thank you for reply. can u give me more information about cfx?unfortulantely,i dont know what is cfx.i haven't hear anything about it.is it a software?or is it a package for fluent? regards masood
  Reply With Quote

Old   February 15, 2005, 03:45
Default Re: mass transfer in fluent!
  #8
masood yooceframandi
Guest
 
Posts: n/a
Dear Arash, yes,i'm iranian(M.Sc. student of Isfahan University of Technology).but i am a new user of fluent.it means,maybe my guidance will not be useful for u.but you can get more information and help about your problem in this site.too many people will help you. regards,masood
  Reply With Quote

Old   February 15, 2005, 21:53
Default Re: mass transfer in fluent!
  #9
Robin
Guest
 
Posts: n/a
Hi Masood,

Go to www.ansys.com for more info.

Regards, Robin
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass transfer in ANSYS thipps ANSYS 1 August 29, 2013 11:05
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
fluent 6.2 and mass transfer in eulerian model masood yooceframandi FLUENT 0 June 8, 2005 15:27
additional variable mass transfer in CFX5.6 john CFX 1 February 14, 2004 01:30
May fluent can simulate heat and mass transfer? yueroo FLUENT 3 April 24, 2001 11:19


All times are GMT -4. The time now is 13:03.