CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

why the zones gets split at sharp corners/bends

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 16, 2005, 03:13
Default why the zones gets split at sharp corners/bends
  #1
Laxminarayana
Guest
 
Posts: n/a
Separating wall zone 12 into zones 12 and 14. Warning: %thread-separate-notify: thread 14 already exists.

thanks in advance belide.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to split hex mesh in icem with desired height? adam2008 ANSYS Meshing & Geometry 3 August 27, 2009 14:59
Skipping Zones 1337Hal FLUENT 0 April 6, 2009 21:19
Large domain: split zones and import BCs Dothan FLUENT 0 May 9, 2008 08:36
split functioin in CCM+ Peter Specht CD-adapco 1 March 5, 2008 09:14
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 10:32.