CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

GAMBIT - Cooper Scheme

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 16, 2005, 08:57
Default GAMBIT - Cooper Scheme
  #1
JB
Guest
 
Posts: n/a
Hello,

I'm stucked w/ a meshing problem while using a cooper scheme. I get this error message : Assertion failed in BarrelCapStack. cc, line 57: NULL != next_cap while meshing volume.17.

Here is the description of my geometry: I have a 1 single volume that COULD be disretized in 3 volumes : the central one would be a regular hexahedron ; the two exterior ones would be two twisted hexahedra. total : 14 faces (6 source faces for the cooper scheme)

any idea why the cooper scheme does not work fine here?

Cheers, JB
  Reply With Quote

Old   February 16, 2005, 22:01
Default Re: GAMBIT - Cooper Scheme
  #2
samir
Guest
 
Posts: n/a
A cooper scheme fails only if a geometry converges to a pipe. why exactly do u want a cooper; A mapped hex could replace a cooper. But it all depends on what your lookin for!
  Reply With Quote

Old   February 17, 2005, 05:22
Default Re: GAMBIT - Cooper Scheme
  #3
JB
Guest
 
Posts: n/a
I think I just Cannot avoid a cooper : I have no choice but meshing several source faces of my volume w/ a Tri-pave scheme. But what do you mean by "A cooper scheme fails only if a geometry converges to a pipe" ? I'm sorry, my english is not perfect at all. Anyway, If someone got a similar problem, I found a trick to avoid the pb: just split the initial complicated volume into several simple ones. That way I don't get error messages anymore.

Cheers,JB
  Reply With Quote

Old   February 17, 2005, 09:31
Default Re: GAMBIT - Cooper Scheme
  #4
Samir
Guest
 
Posts: n/a
  Reply With Quote

Old   February 17, 2005, 09:32
Default Re: GAMBIT - Cooper Scheme
  #5
Samir
Guest
 
Posts: n/a
Yes, I did have a similar problem and someone did say: Split and win. But , I had certain restrictions on splitting the volume. So, I said see what your lookin for and then make an optimum choice. Regards Samir.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Constant value by Cooper scheme Mohsin FLUENT 0 August 21, 2011 22:14
[GAMBIT] Boundary Layer without using Cooper scheme Lilly ANSYS Meshing & Geometry 6 March 17, 2011 16:14
Cooper Scheme Question (w/pics) Forrest ANSYS Meshing & Geometry 2 March 26, 2009 16:19
IMPRINT COMMAND IN COOPER MESHING SCHEME TINA FLUENT 3 October 7, 2006 06:03
Cooper Scheme Sandy Lawson FLUENT 0 December 14, 2004 07:43


All times are GMT -4. The time now is 04:10.