CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

stirred tank Modeling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 17, 2005, 02:44
Default stirred tank Modeling
  #1
Randheer Yadav
Guest
 
Posts: n/a
Hi, I am modeling a stirred tank fitted with rushton turbine. I am trying MRF and Sliding mesh techniques. The doubts which i have is, 1) How to fix the impeller rotation direction (clockwise /anticlockwise)? 2)When using MRF Should the rotating speed be supplied for both impeller and the inner fluid zone (In my case impeller speed is 270 rpm)or only to the impeller? 3)When using SM should the impeller speed be given only to the grid associated with the inner fluid zone. and impller will remain stationary? please help me.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DPM particle tracking in stirred tank parisa- FLUENT 1 August 7, 2012 13:03
Need help with modeling of aerated stirred tank bitkiz CFX 2 May 19, 2011 02:17
Stirred tank, TKE, DES, RSM J. Gimbun FLUENT 0 February 21, 2006 06:57
CFX 5.5.1 stirred tank and LES problem Nishant CFX 2 September 13, 2002 08:11
Gas-liquid in Stirred tank Modeling in FLUENT4.5 Patchawat FLUENT 0 February 13, 2001 06:24


All times are GMT -4. The time now is 18:06.