CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

means of Pressure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 22, 2005, 04:06
Default means of Pressure
  #1
mohr
Guest
 
Posts: n/a
in post procossing op pressure i saw static and absolute and total what is the meaning for each one n Fluent

cause the result value is difrrent between them

thanks mohr
  Reply With Quote

Old   February 22, 2005, 04:12
Default Re: means of Pressure
  #2
Luca
Guest
 
Posts: n/a
Static should be the gauge pressure (respect to your operating pressure), absolute the sum of the gauge and operating pressure, and total the total pressure:

ptot=p(1 + (gamma-1)/2 *Machnumber^2)^((gamma-1)/gamma)

if I remember well. Luca
  Reply With Quote

Old   February 22, 2005, 04:26
Default Re: means of Pressure
  #3
mohr
Guest
 
Posts: n/a
thanks Luca

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 06:27
Using pressure outlet BC Shreyansh FLUENT 0 November 5, 2010 15:57
Setup/monitor points of pressure and force coefficients siw CFX 3 October 22, 2010 06:07
Setting pressure and velocity in inlet Asghari FLUENT 5 September 22, 2006 13:23
Neumann pressure BC and velocity field Antech Main CFD Forum 0 April 25, 2006 02:15


All times are GMT -4. The time now is 05:05.