CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Inlet boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 22, 2005, 06:57
Default Inlet boundary condition
  #1
Araz
Guest
 
Posts: n/a
Hi, Can you tell me how I can set Static Pressure in inlet boundary condition?
  Reply With Quote

Old   February 22, 2005, 07:46
Default Re: Inlet boundary condition
  #2
Jason
Guest
 
Posts: n/a
In pressure inlet b.c. it's one of the inputs. Same with pressure far field, inlet vent, and I believe Mass-Flow Inlet too.

In velocity inlet it's one of the variables that gets solved for to meet the other boundary conditions of the model.

Hope this helps, and goodluck Jason
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ATTENTION! Reliability problems in CFX 5.7 Joseph CFX 14 April 20, 2010 15:45
How to use a solution as an inlet boundary condition in another problem in fluent geryes FLUENT 0 February 25, 2010 17:32
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
inlet and outlet boundary condition for turbomachinery solution siamak1424 OpenFOAM 2 August 15, 2009 11:14
Natural convection - Inlet boundary condition max91 CFX 1 July 29, 2008 20:28


All times are GMT -4. The time now is 16:14.