CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Surface creation problems with GAMBIT ! (http://www.cfd-online.com/Forums/fluent/35860-surface-creation-problems-gambit.html)

enemi09 February 25, 2005 13:19

Surface creation problems with GAMBIT !
 
Hi fellow people,

Another problem i encountered while creating my parallel flow field plate channel for PEMFC modeling! In fact i need to create a surface (let's simplify; a rectangle with 2 or 3 smaller long rectangle in it which need to be subtracted from the big rectangle surface). I have created already all the edges but when i try to : face create ("face1") wireframe "l1" "l2" "l3" etc... (24 edges define the surface i want to create), then it gives me an error like this : ERROR: the wireframe model contains edges which cannot be connected !?

If someone can help me ?

Thanks for all,

Matt

Bikash February 26, 2005 11:42

Re: Surface creation problems with GAMBIT !
 
make a face with the outer boundary edges first, then create smaller ones and subtract.

enemi09 February 26, 2005 11:52

Re: Surface creation problems with GAMBIT !
 
thanks soo much Bikash ... it worked perfectly ...

See you around,

Matt


All times are GMT -4. The time now is 22:55.