CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Mesh grading problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 1, 2005, 11:18
Default Mesh grading problem
  #1
Y
Guest
 
Posts: n/a
I have a problem I made grading of my mesh and exported it to mesh file And then I forget about what value or what type of grading I used when I imported this mesh file back in gambit to check grading I used. I could not see the value in fact I see the default option. How can I check what value and what type of grading I used. Y

  Reply With Quote

Old   March 1, 2005, 13:41
Default Re: Mesh grading problem
  #2
Jason
Guest
 
Posts: n/a
You can only get that information from the original gambit file. If it's been deleted from the model, then you'll have to dig through the .jou file to try and find it. Other than that, it's a guessing game.

Jason
  Reply With Quote

Old   March 2, 2005, 03:48
Default Re: Mesh grading problem
  #3
Sham
Guest
 
Posts: n/a
Perhaps you could go to the modify mesh icon in Gambit and you select(click) the egde then the values should appear. I have tried this before.

Sham.
  Reply With Quote

Old   March 2, 2005, 06:47
Default Re: Mesh grading problem
  #4
Y
Guest
 
Posts: n/a
I think it just shows you "sucessive ratio" everytime even if you have mesh grading. You can do this and check it with tut 23 case of backawrd step. I do not how to get this mesh grading with just *.msh file. Z
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
Dynamic Mesh Problem. Tom Clark FLUENT 9 July 7, 2010 07:56
Moving mesh problem Geon-Hong FLUENT 3 April 5, 2010 03:24
[GAMBIT] Problem with mesh. Please Help... maziboss ANSYS Meshing & Geometry 1 September 28, 2009 02:24


All times are GMT -4. The time now is 05:14.