What is the best modeling program?? for fluent?

cartman · October 20, 2011, 01:53

Hi!!

I know, Ansys have DM(Design Modular)..

but I'm lazy person.. and I want to use my favorite modeling program:UG

and I found that, another programs( Catia, AutoCAD, etc)can employed for

modeling,

here is my curious, which modeling programe is best for fluent?

Do I have to study about DM??

tnx for reading, wait for your reply

Have fun!

Sushilkumar · October 20, 2011, 02:28

If you use DM, you can save a lot of your time for repetitive studies. In case you want to change your model a bit, when you are using DM, rest of the steps (meshing, setup etc) do not require a lot time as settings remain there for your use. On the other hand if you are using any other modelling s/w you will have to do it from start.
Finally the choice is yours..!!!

m2montazari · October 20, 2011, 18:00

hi,
as said, modeling by dm is prefered due to more compatibility with whole ansys utilities. but if you insist to use some other softwares such as catia, solidworks,.... choose your desired one which can export geometry in ACIS (*.sat) format. this is somewhat the best format for transfering geometry between softwares. however you must use ansys for meshing and the mesh would not be exported by such softwares. if you want a program to make geometry and mesh both in one, use ansys workbench or gambit.(I prefer gambit!)
yours,
mohammad

cartman · October 21, 2011, 09:35

Thank you for reply

I think, I need to check Manual for DM

October 20, 2011, 01:53	What is the best modeling program?? for fluent?	#1
cartman Member Chris, Kam Join Date: Nov 2010 Location: Busan, South Korea Posts: 42 Rep Power: 15	Hi!! I know, Ansys have DM(Design Modular).. but I'm lazy person.. and I want to use my favorite modeling program:UG and I found that, another programs( Catia, AutoCAD, etc)can employed for modeling, here is my curious, which modeling programe is best for fluent? Do I have to study about DM?? tnx for reading, wait for your reply Have fun!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which opensource and free CAD program?	Xwang	Main CFD Forum	1	October 24, 2010 17:29
Update boundary conditions calculated by an external program	CedricVH	OpenFOAM	2	January 15, 2010 11:55
Help needed on finding a good program for microfluidic modeling...	hamini	Main CFD Forum	1	June 30, 2009 00:14
Modeling Flow/Saturation/Absorption in Fibers	Gene Dougherty	Main CFD Forum	0	June 6, 2003 14:49
CFD Modeling of Two-phase Flow in Small Dia.Tubes	Eric Poindexter	Main CFD Forum	2	September 22, 2000 09:21

October 20, 2011, 02:28		#2
Sushilkumar Member Join Date: Apr 2009 Location: Pune Posts: 37 Rep Power: 17	If you use DM, you can save a lot of your time for repetitive studies. In case you want to change your model a bit, when you are using DM, rest of the steps (meshing, setup etc) do not require a lot time as settings remain there for your use. On the other hand if you are using any other modelling s/w you will have to do it from start. Finally the choice is yours..!!!

October 20, 2011, 18:00		#3
m2montazari Senior Member Mohammad Join Date: Feb 2010 Location: Shiraz, Iran Posts: 108 Rep Power: 16	hi, as said, modeling by dm is prefered due to more compatibility with whole ansys utilities. but if you insist to use some other softwares such as catia, solidworks,.... choose your desired one which can export geometry in ACIS (*.sat) format. this is somewhat the best format for transfering geometry between softwares. however you must use ansys for meshing and the mesh would not be exported by such softwares. if you want a program to make geometry and mesh both in one, use ansys workbench or gambit.(I prefer gambit!) yours, mohammad

October 21, 2011, 09:35		#4
cartman Member Chris, Kam Join Date: Nov 2010 Location: Busan, South Korea Posts: 42 Rep Power: 15	Thank you for reply I think, I need to check Manual for DM