CFD Online Discussion Forums

CFD Online Discussion Forums (
-   FLUENT (
-   -   Export Gambit to CFD-ACE+ (

garywang March 4, 2005 04:28

Export Gambit to CFD-ACE+
Could I export the structural grid file built in gambit to CFD-ACE+ ? If it could be done, what kind of solvers should I chose from the main menu ?

Charles March 4, 2005 05:58

Re: Export Gambit to CFD-ACE+
You could, but it has to be a slightly bizarre way of doing it. Gambit would not be my choice for a structured mesh, CFDRC's own CFD-Geom is a way better tool for the job! Get Gambit to export a Plot3d format file (can it?, maybe cgns would be a better call) and import that into Geom to pre-process it for Ace, then export as a DTF for Ace. But I think this is the wrong way around to do it.

garywang March 5, 2005 02:05

Re: Export Gambit to CFD-ACE+
Thank you, Charles. I decide to use icemcfd 5.1 to build and export grid file to ace+. But do you know whether ACE+ can accept hybrid mesh built in icemcfd 5.1 ot not ? Because I try meny time and never success .


Charles March 7, 2005 04:05

Re: Export Gambit to CFD-ACE+
In theory it should, but I've never done it myself.

majid_esi January 17, 2012 05:52

ACE+ meshers have a very good compatibility..

All times are GMT -4. The time now is 08:08.