CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Errors in Gambit befor exit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 7, 2005, 08:50
Default Errors in Gambit befor exit
  #1
anisa
Guest
 
Posts: n/a
Dear colleagues befor exit from Gambit I has made the following: in "Solver" I has put "Fluent 5/6", then has gone in "Specify boundary types" and then I try to export mesh. But the mistake "Continuum or Boundary condition specified on entity edge ... is invalid for fluent 6". What I must do? Such mistake befor was not.
  Reply With Quote

Old   March 7, 2005, 09:06
Default Re: Errors in Gambit befor exit
  #2
Jason
Guest
 
Posts: n/a
I would say that your mesh is 2D and you forgot to mark the box "export 2d mesh".

Hope this helps.

Jason
  Reply With Quote

Old   March 7, 2005, 09:56
Default Re: Errors in Gambit befor exit
  #3
anisa
Guest
 
Posts: n/a
Thank you Mr. Jason!!! You are right!!!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 15:33
Building OpenFOAM1.7.0 from source ata OpenFOAM Installation 42 May 14, 2012 20:48
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 bookie56 OpenFOAM Installation 8 August 13, 2011 04:03
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 02:58
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07


All times are GMT -4. The time now is 08:19.