CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Error reading 3d eccentric annulus in Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 16, 2005, 19:46
Default Error reading 3d eccentric annulus in Fluent
  #1
Parag Ramteke
Guest
 
Posts: n/a
Hello friends, I am trying to create eccentric annulus in 3D.I am creating outer and inner cylinder and moving inner cylinder for eccentricity and the subtracting inner cylinder from outer to get eccentric annulus. after meshing faces and whole volume and specifying boundary conditions and velocity inlet and pressure outlet the mesh is exported to Fluent. In Fluent (selcted "Run fluent in 3D" at the begining of Fluent), when read case file the created it gives me error like " Error: no cells in zone, id = 0, ind1 = 1, indn = 0Reading Cells: failed while reading section 12.

Clearing partially read grid.

Error: Read aborted due to critical error. Error Object: ()" Any help is appreciated Parag
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Two questions on Fluent UDF Steven Fluent UDF and Scheme Programming 7 March 23, 2018 04:22
How to open Icem mesh in Ansys Fluent? emmkell FLUENT 27 February 6, 2018 04:34
Fluent 6.3 32bit vs Fluent 12.0 64bit ibex7 FLUENT 7 April 18, 2011 03:44
Fluent 12.0 is worst then Fluent 6.2 herntan FLUENT 5 December 14, 2009 03:57
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 04:27


All times are GMT -4. The time now is 06:03.