CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Problem with Eccentric pipe annulus..Pls Help me

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 16, 2005, 07:24
Default Problem with Eccentric pipe annulus..Pls Help me
  #1
Parag Ramteke
Guest
 
Posts: n/a
Hello, I am using Fluent to study the flow of Non-Newtonian Fluid through pipe annulus.To verify my results (pressure drop over length of pipe)with analytical, at present I am using Fluid of density 800 kg/m^3 and Viscosity 1 kg/m-s. I got the results matching with analytical solution for 2D geometry in Gambit for concentric annulus only. But when I make the annulus eccentric the pressure drop is more than the concentric annulus(outer pipe is 2m in diameter50m long; inner pipe is 1 m in diameter and 50 m long; I am using offset of 0.1,0.2,0.3..from center). (In Gambit,first I am creating vertices and then edges--joining edges to creat rectangular face--then subtracting inner rectangle from outer retaining innner rectangle to get the annulus--meshing edges,faces--and specifying boundary conditions as VELOCITY INLET and PRESSURE OUTLET). I have tried to refine the mesh but couldn't get the answer. I also tried in 3D , but in 3D I couldn't even get the results matching with analytical for concentric annulus. I would appreciate it greatly if you can help me with this. Thank you very much for your time

Best Wishes, Parag

  Reply With Quote

Old   March 18, 2005, 01:50
Default Q:how to extract dynmic pressure in fluent
  #2
amresh
Guest
 
Posts: n/a
pls send the information regarding how to extract the dynamic pressure in fluent. and how to write on excel file.then how to the regession.
  Reply With Quote

Old   April 4, 2005, 07:34
Default Re: Q:how to extract dynmic pressure in fluent
  #3
daniel
Guest
 
Posts: n/a
monitors/surface/dynamic pressure on what you want/ after you have to open it in excel. easy

cip
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Problem with O-grid in drill pipe bahadir ANSYS Meshing & Geometry 8 May 6, 2011 12:51
convergence problem in a long pipe feizaghaee CFX 7 February 16, 2010 09:05
Flow through a pipe problem Mark Wisom Main CFD Forum 4 July 25, 2002 14:20
fluid flow fundas ram Main CFD Forum 5 June 17, 2000 22:31
pls explian me how to simulate 2d-labyrinth seal problem using fluent4.23 murali mohan Main CFD Forum 0 October 26, 1999 02:40


All times are GMT -4. The time now is 16:58.