CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Gambit modeling troubleshooting

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 18, 2005, 01:32
Default Gambit modeling troubleshooting
  #1
Ng
Guest
 
Posts: n/a
Hi. I'm trying to stitch up some faces to form a volume but i get a error message ACIS error 52000: All faces are used twice (Is this an open shell?) May i know what mistake i had made???? I had checked that it is a closed region. I had also got error message saying that i can't use face.546 as it is linked for meshing. But i had unlinked the face mesh but it doesn't help. So i copy this same face and use it to stitich up the volume. But the problem persists.

Thanks Regards
  Reply With Quote

Old   March 18, 2005, 05:33
Default Re: Gambit modeling troubleshooting
  #2
Mark
Guest
 
Posts: n/a
Is face.546 sharing an edge or connected to another face which is linked for meshing? If so you'll have to unlink those also.

Mark
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Modeling of furnace in Gambit Abba H FLUENT 7 December 6, 2011 12:59
Need gambit modeling guide nits FLUENT 0 January 13, 2011 14:01
gambit modeling guide marthial OpenFOAM Meshing & Mesh Conversion 4 March 23, 2010 13:37
2D modeling of heart Left Ventricle using Gambit? Alvinsen FLUENT 3 March 14, 2008 15:21
Parametric Modeling with GAMBIT David Shkval FLUENT 4 March 7, 2002 08:50


All times are GMT -4. The time now is 06:46.