CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Mesh problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 22, 2005, 04:42
Default Mesh problem
  #1
abdou
Guest
 
Posts: n/a
Hi all I am studying a turbulent jet in 3d. So i am using cylindrical domain with circular inlet. the origin of coordinates system is located at the inlet center. Thus a min of the three coordinates is 0 but When I import mesh and check it I have the following message: Grid Check

Domain Extents:

x-coordinate: min (m) = -4.592274e-18, max (m) = 1.000000e-01 thus -4.592274e-18 instead of 0.00 and the same for other coodinates. y-coordinate: min (m) = -7.500000e-02, max (m) = 7.500000e-02 z-coordinate: min (m) = -7.500000e-02, max (m) = 7.500000e-02 any helps are appreciated
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic Mesh Problem. Tom Clark FLUENT 9 July 7, 2010 07:56
[GAMBIT] Problem with mesh. Please Help... maziboss ANSYS Meshing & Geometry 1 September 28, 2009 02:24
mesh generation problem Ellen FLUENT 7 February 18, 2009 22:20
mesh control problem TUM CFX 4 July 27, 2001 16:17
Convergence problem when ustructured mesh is used. SangJin Ryu CD-adapco 3 October 5, 2000 20:26


All times are GMT -4. The time now is 10:07.