How to change correlation of H and T?

March 28, 2005, 22:07

Hi everyone

I'm doing a case with heat transfer. In my case, I need to compute the change of enthalpy. I find the correlation of enthalpy and temperature is not exactly satisfied with my case, so I want to change the correlation. I wonder whether I can change the referance temperature and enthalpy of the referance temperature or not and how to do that. Anyone is familiar with this? Help me

BR

Erica

March 29, 2005, 08:04

The reference values are all defined under Report->Reference Values

Hope this helps, and goodluck, Jason

March 29, 2005, 18:56

Change Cp.

March 29, 2005, 23:01

I'll try. Thank you.

March 29, 2005, 23:02

The Cp is right. It needn't be changed, just the reference enthalpy. Thank you anyway.

March 28, 2005, 22:07	How to change correlation of H and T?	#1
Erica Guest Posts: n/a	Hi everyone I'm doing a case with heat transfer. In my case, I need to compute the change of enthalpy. I find the correlation of enthalpy and temperature is not exactly satisfied with my case, so I want to change the correlation. I wonder whether I can change the referance temperature and enthalpy of the referance temperature or not and how to do that. Anyone is familiar with this? Help me BR Erica

March 29, 2005, 08:04	Re: How to change correlation of H and T?	#2
Jason Guest Posts: n/a	The reference values are all defined under Report->Reference Values Hope this helps, and goodluck, Jason

March 29, 2005, 18:56	Re: How to change correlation of H and T?	#3
Allan Walsh Guest Posts: n/a	Change Cp.

March 29, 2005, 23:01	Re: How to change correlation of H and T?	#4
Erica Guest Posts: n/a	I'll try. Thank you.

March 29, 2005, 23:02	Re: How to change correlation of H and T?	#5
Erica Guest Posts: n/a	The Cp is right. It needn't be changed, just the reference enthalpy. Thank you anyway.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to change density in OpenFoam	zhaowei	OpenFOAM Running, Solving & CFD	8	November 5, 2018 10:37
Solid/liquid phase change	fabian_roesler	OpenFOAM	10	December 24, 2012 06:37
Change cell zone index/thread during simulation	neilduffy1024	FLUENT	0	January 17, 2011 09:40
no enthalpy change across the momentum source	Atit Koonsrisuk	CFX	2	December 19, 2005 02:33
Multicomponent fluid	Andrea	CFX	2	October 11, 2004 05:12