|
[Sponsors] |
April 1, 2005, 04:31 |
best turbulence model
|
#1 |
Guest
Posts: n/a
|
hi all. i am investigating the flow separation over a 2D airfoil in ground effect. what would be the best turbulence model to use?
cheers, matt. |
|
April 1, 2005, 07:01 |
Re: best turbulence model
|
#2 |
Guest
Posts: n/a
|
hi i think 1 equation model is better that other nabeel
|
|
April 3, 2005, 10:59 |
Re: best turbulence model
|
#3 |
Guest
Posts: n/a
|
hi i study 5 turbulence models from which k-w,baldwin barth, spallart allmaras, i now beleived that spallart allmaras is the most suitable one for flow over airfoil from simplicity,and good result khairy-Egypt
|
|
April 4, 2005, 07:17 |
Re: best turbulence model
|
#4 |
Guest
Posts: n/a
|
thanks heaps guys
|
|
April 7, 2005, 17:58 |
Re: best turbulence model
|
#5 |
Guest
Posts: n/a
|
Spallart Allmaras works very well for me, in a Turbine design. Allows convergence with Compressible flow, rotating components, v.high temperatures
see http://rashy.ic24.net |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wrong calculation of nut in the kOmegaSST turbulence model | FelixL | OpenFOAM Bugs | 27 | March 27, 2012 09:02 |
Low Reynolds k-epsilon model | YJZ | ANSYS | 1 | August 20, 2010 13:57 |
KOmega Turbulence model from wwwopenFOAMWikinet | philippose | OpenFOAM Running, Solving & CFD | 30 | August 4, 2010 10:26 |
Fan heater model: what turbulence source to use? | andy20 | CFX | 7 | March 3, 2008 16:42 |
SSG Reynolds Turbulence Model | Georges | CFX | 1 | February 28, 2007 16:15 |