CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Meshing problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 3, 2005, 15:03
Default Meshing problem
  #1
John
Guest
 
Posts: n/a
Hi, I'm trying to mesh a volume constitute basicaly of 2 rectangles joined together by a bank tube. I've diveded de volume into 3 parts ( the 2 rectangles and the bank tube) to create the mesh, but I'm having problems whit the holes on the faces of the rectangles (the entrance and outlet of the bank tube). Does anyone have a sujestion on how to mesh this volume? Thanks in advance.

John
  Reply With Quote

Old   April 4, 2005, 05:22
Default Re: Meshing problem
  #2
daniel
Guest
 
Posts: n/a
how did you created the volumes. how many faces do you have at the joining surfaces between the volumes. you must have just one surface. and normaly it works. ok
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] Hex meshing problem DM12 patrick ANSYS Meshing & Geometry 7 January 9, 2015 08:21
Problem with querying the meshing database in CFX-Pre ashtonJ CFX 4 August 15, 2014 20:55
Strange ANSYS Meshing 13.0 Problem brunob ANSYS Meshing & Geometry 3 June 21, 2011 20:03
Meshing problem in GAMBIT Vidya Raja FLUENT 0 May 20, 2006 23:31
GAMBIT meshing problem Gauthier Lambert Main CFD Forum 1 August 3, 2000 09:22


All times are GMT -4. The time now is 12:18.