CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Injection at Axis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 4, 2005, 01:54
Default Injection at Axis
  #1
Dan Dressler
Guest
 
Posts: n/a
Hi,

Another question that I have: I am using an air-blast atomizer and when I specify my x-y locations in my point properties tab and then initialize, I am given the message in the output window "Injection must be located at the axis". I have tried shifting my points into the domain by nothing works as of yet. Any suggestions? Thanks.

Dan
  Reply With Quote

Old   April 4, 2005, 14:23
Default Re: Injection at Axis
  #2
Srivatsan
Guest
 
Posts: n/a
R u using axi-symmetric case? In that case, after solving the continous phase, go to define--->dicrete phase--->. in that click injection and selcet "Group Injection. There give ur co-ordinates!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[DesignModeler] axis display disparity of model and triad ram881973 ANSYS Meshing & Geometry 12 January 7, 2014 12:51
Urgent help needed with spray injection nick CD-adapco 14 June 29, 2008 18:48
On DPM injection properties. akr FLUENT 4 October 23, 2006 10:54
DPM, UDF, Injection Type Zhang FLUENT 0 June 8, 2005 15:51
using injection file and parallel process Cindy Jones FLUENT 0 January 23, 2003 13:40


All times are GMT -4. The time now is 17:23.