CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

postprocessing problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 8, 2005, 22:46
Default postprocessing problem
  #1
wanghong
Guest
 
Posts: n/a
hi,all.

when a species transport equation is finished,i want know the contours of velocity in a plane of 30 degrees inclination angle from the horizontal .How to define the inclination plane ? Thanks.
  Reply With Quote

Old   April 9, 2005, 11:35
Default Re: postprocessing problem
  #2
Jason
Guest
 
Posts: n/a
Make sure to set your axis for the Fluid (Define->Boundary Conditions->Fluid... set the location and direction of the axis so that the axis is the axis of rotation of the plane that you want). Then create an isosurface (Surface->Iso-Surface) of constant Grid -> Angular Location and set it to 30degrees. Remember that 30degrees is based on the right-hand rule for the axis you defined for the fluid.

Changing the axis doesn't change any of the flow solution, because the flow was solved in cartesian coordinates. This axis is used for post-processing.

Hope this helps, and good luck, Jason
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
conduction problem venkataramana OpenFOAM 3 December 1, 2013 08:30
area does not match neighbour by ... % -- possible face ordering problem St.Pacholak OpenFOAM 9 November 22, 2011 11:02
Problem in implementing cht tilek CFX 3 May 8, 2011 08:39
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13
Is this problem well posed? Thomas P. Abraham Main CFD Forum 5 September 8, 1999 14:52


All times are GMT -4. The time now is 03:10.