CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Fluent 6.2 and gcc compiler in Sun Blade 2500

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 21, 2005, 15:07
Default Fluent 6.2 and gcc compiler in Sun Blade 2500
  #1
Nitu Gupta
Guest
 
Posts: n/a
We recently acquired two new Sun Solaris systems(Sun Blade2500), which didnot come with any C compiler. So, we installed gcc compiler but I am stillunable to run my compiled UDF. This UDF is written in such a way that it runs only in compiled mode. I have ask Fluent about it and they say I need to make a change in makefile.udf in order to use gcc compiler. I would appreciate if somebody can tell me what are the changes that needs to be made in order for Fluent to accept gcc compiler as a default compiler? I have project that needs to be done and the company is not going to spend money at this moment. So, any help would be greatly appreciated!!! Thanks,
  Reply With Quote

Old   April 21, 2005, 18:40
Default Re: Fluent 6.2 and gcc compiler in Sun Blade 2500
  #2
pUl|
Guest
 
Posts: n/a
It would be more helpful if you can post some error message to start with?
  Reply With Quote

Old   April 21, 2005, 22:44
Default Re: Fluent 6.2 and gcc compiler in Sun Blade 2500
  #3
Harish
Guest
 
Posts: n/a
http://www.imp.cnrs.fr/intranet/flue...df/node183.htm

Check this.

What os is your system running on ?

-H
  Reply With Quote

Old   April 22, 2005, 10:17
Default Re: Fluent 6.2 and gcc compiler in Sun Blade 2500
  #4
Nitu Gupta
Guest
 
Posts: n/a
Hi All, Thank you for your kind responses. I am operating in Sun Solaris v9.0 The error message that I get is "Errorpen_udf_library: No such file or directory." My understanding so far about this is that I have not been able to make the necessary changes in the makefile.udf to make the gcc compiler as the default compiler. Would really appreciate if anybody can tell me what is the changes that needs to be made. Thanking You!
  Reply With Quote

Old   April 22, 2005, 11:51
Default Re: Fluent 6.2 and gcc compiler in Sun Blade 2500
  #5
pUl|
Guest
 
Posts: n/a
Can you see a libudf library being created in the working directory?
  Reply With Quote

Old   April 22, 2005, 13:02
Default Re: Fluent 6.2 and gcc compiler in Sun Blade 2500
  #6
Nitu Gupta
Guest
 
Posts: n/a
Yes, I do see a libudf directory under the working directory and it has the following directories in it: *src *ultra *ultra64 and a makefile which doesnot have any extension ot it. Acutally before the error message that I posted earlier, another error message appears and it says cannot open "-log" file.(this happens when you hit the build command) I do greatly appreciate your time and kind response. Thanks Again,
  Reply With Quote

Old   April 22, 2005, 13:50
Default Re: Fluent 6.2 and gcc compiler in Sun Blade 2500
  #7
Nitu Gupta
Guest
 
Posts: n/a
Yes, I do see a libudf directory under the working directory and it has the following directories in it: *src *ultra *ultra64 and a makefile which doesnot have any extension ot it. Acutally before the error message that I posted earlier, another error message appears and it says cannot open "-log" file.(this happens when you hit the build command) I do greatly appreciate your time and kind response. Thanks Again,
  Reply With Quote

Old   April 22, 2005, 18:23
Default Re: Fluent 6.2 and gcc compiler in Sun Blade 2500
  #8
pUl|
Guest
 
Posts: n/a
It is a problem with the path I would say. Looks like you started Fluent from a directory which is different from the directory where the libudf directory is present. Am I right?
  Reply With Quote

Old   April 29, 2005, 13:58
Default Re: Fluent 6.2 and gcc compiler in Sun Blade 2500
  #9
Nitu Gupta
Guest
 
Posts: n/a
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gcc compiler path in make file kid OpenFOAM Installation 1 August 30, 2011 06:39
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 13:43
Question on specify gcc compiler for OpenFOAM 15 peterlai OpenFOAM Installation 2 October 2, 2008 07:20
Gerris software installation mer Main CFD Forum 2 November 12, 2005 08:50


All times are GMT -4. The time now is 01:37.