|
[Sponsors] |
April 22, 2005, 08:07 |
Error message
|
#1 |
Guest
Posts: n/a
|
Hello every:
When I start the simulation, always report error messages: Error: Floating point error: invalid number and befor that, at the step"initialization"-"compute from", when i select "all zones" it gives a error message:"WARNING: non-positive volumes exist." If there´s somthing wrong in the mesh grid.Please tell me how to solve it.Urgent! Thank's a lot in advance. |
|
April 22, 2005, 08:16 |
Re: Error message
|
#2 |
Guest
Posts: n/a
|
It's a problem in your grid.
If you're simulating using the Axi solver, pay attention that the X axis has to me your symmetry axis and that you can't have cells under it. Regards, ap |
|
April 22, 2005, 09:12 |
Re: Error message
|
#3 |
Guest
Posts: n/a
|
Dear apÄ
Thanks you very much. I moved the whole face in a positive direction and let all grid above zero.it works. I appreciate your help very much. |
|
April 22, 2005, 09:13 |
Re: Error message
|
#4 |
Guest
Posts: n/a
|
Dear ap:
Thanks you very much. I moved the whole face in a positive direction and let all grid above zero.it works. I appreciate your help very much. |
|
April 22, 2005, 17:20 |
Re: Error message
|
#5 |
Guest
Posts: n/a
|
|
|
|
|