CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   set boundary condition in Neutral file, in Gambit (http://www.cfd-online.com/Forums/fluent/36495-set-boundary-condition-neutral-file-gambit.html)

Vito Chow April 25, 2005 23:40

set boundary condition in Neutral file, in Gambit
 
In Gambit, when setting "Solver->Generic" so as to export Neutral file, there are only two boundary condition types, ELEMENT SIDE & NODE. Anybody know how to introduce other BC types, such as , wall/mass flow inlet when exporting Neu file? (not *.msh). Any help will be appreciated!

Mehdi Ghoddosy April 26, 2005 06:43

Re: set boundary condition in Neutral file, in Gam
 
Dear Vito: You can not set your proposed boudary condition in gambit. You can simply set differt boundary condition names in gambit and then change it to appropriate type in fluent.(you can change all boundary condition types in fluent but not names)

HVN April 26, 2005 06:50

Re: set boundary condition in Neutral file, in Gam
 
As I remember, with the neutral format you could only export the mesh not the boundary conditions.


All times are GMT -4. The time now is 02:23.