CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

updating dynamic mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 27, 2005, 12:19
Default updating dynamic mesh
  #1
greg
Guest
 
Posts: n/a
Hi,

if you deform a mesh in ansys and get the new coordinates of all the deformed nodes, can this data be read back into fluent to update the dynamic mesh?

Many thanks

greg
  Reply With Quote

Old   April 27, 2005, 15:51
Default Re: updating dynamic mesh
  #2
Jason
Guest
 
Posts: n/a
Contact your fluent support. There is an add-on written by a third party that works with Fluent 6.2 that will do this. Not sure of the cost, but it isn't free.

Jason
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 07:42
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
Extended version: Dynamic mesh fusij OpenFOAM 2 February 18, 2011 03:12
dynamic mesh on a hexa grid Manoj Kumar FLUENT 0 August 21, 2007 08:41
Dynamic mesh + grid adapt = Crash! (Files included BillH FLUENT 4 July 24, 2007 16:31


All times are GMT -4. The time now is 07:35.