CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

about EDC

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 8, 2005, 01:55
Default about EDC
  #1
handou
Guest
 
Posts: n/a
hello, i want to use EDC module to calculate a reaction flow. But, there is an error said"Error: isat_table_init: xscale must be positive; xscale = 0.000000e+00" what is the problem, how to solve? thanks!
  Reply With Quote

Old   May 23, 2005, 13:04
Default Re: about EDC
  #2
Ehsan Alborzi
Guest
 
Posts: n/a
Hi This problem occurs particularely when one wants to solve the calculation directly using EDC. Try to simulate your case for a partially premixed case after it is converged then you could apply EDC using ISAT. Regards
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem on EDC model for coal combustion lei FLUENT 4 September 3, 2015 09:39
Modeling the Sandia flame D with EDC Christoph_84 FLUENT 1 September 18, 2011 20:24
EDC model Carl FLUENT 0 November 11, 2008 22:36
EDC and cell time scale Trine FLUENT 2 May 31, 2007 07:53
problem about EDC combustion model Ma Shihu FLUENT 1 January 19, 2005 04:25


All times are GMT -4. The time now is 04:44.