CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

On grid independence

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 31, 2005, 11:22
Default On grid independence
  #1
David Chabot
Guest
 
Posts: n/a
Hi, I am modelling a 2D pulsatile flow in a conical tube with a velocity pulse at the inlet that last 40% of the cycle. For some time I have been trying to obtain a grid independent solution. I have run cases with 200 000 cells and one with 800 000 cells. From that I have 2 questions:

1) Is comparing the time-dependent velocity at one point a good way to judge of the grid independence? I ask this because I am getting quite different results form one case to the other.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
grid independence questions lucifer FLUENT 0 December 14, 2009 20:59
unstructured mesh grid independence for Fluent Shane Schouten FLUENT 0 October 11, 2006 16:50
Grid independence check Mattis Voss FLUENT 1 November 23, 2005 11:30
Grid Independence problem for simple pipe geometry chanchala FLUENT 13 November 20, 2003 09:24
Combustion Convergence problems Art Stretton Phoenics 5 April 2, 2002 05:59


All times are GMT -4. The time now is 07:32.