CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Pressure force

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 19, 2005, 02:18
Default Pressure force
  #1
shyam
Guest
 
Posts: n/a
Dear all, I am doing cfd analysis to find wind pressure on anattena. With inlet velocity 16.67 m/s, I got static pressure around 169 pa and total pressure 206 pa. What pressure shall I consider as force, which is really acting on antenna, whether static or total(static + dynamic). Please help me

  Reply With Quote

Old   May 19, 2005, 04:41
Default Re: Pressure force
  #2
Luca
Guest
 
Posts: n/a
static. Luca
  Reply With Quote

Old   May 19, 2005, 06:06
Default Re: Pressure force
  #3
shyam
Guest
 
Posts: n/a
Hi luca But why only static? why not total?
  Reply With Quote

Old   May 19, 2005, 06:45
Default Re: Pressure force
  #4
Luca
Guest
 
Posts: n/a
Because you're interested in loads, so you need to evaluate the difference betweeen local static pressure and free-stream pressure (coefficient of pressure).Luca
  Reply With Quote

Old   May 19, 2005, 16:52
Default Re: Pressure force
  #5
us
Guest
 
Posts: n/a
It sounds confusing to me. Isn't it should be total pressure? If only Load consideration then Static pressure is fine. But when it's about pressure force, then there should be total pressure, if the surface where the pressure force is to be considerred is perpendicular to the flow. Luca, can you clarify my doubt?
  Reply With Quote

Old   June 5, 2005, 06:40
Default Re: Pressure force
  #6
Przemek
Guest
 
Posts: n/a
I have same problem but in the water. Since decembre I am looking for same answer. As I understand you should use static but you have to prepared so fine mesh in boundary to get in first layier dynamic pressure equal 0. please give me notice if you find some thing more?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure force calculation in incompressible solvers philippose OpenFOAM Running, Solving & CFD 10 December 7, 2019 05:51
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 07:27
Setup/monitor points of pressure and force coefficients siw CFX 3 October 22, 2010 07:07
UDF to define or adjust pressure??? engahmed FLUENT 0 July 6, 2010 18:19
Calculate Pressure force andreis FLUENT 0 May 16, 2005 06:40


All times are GMT -4. The time now is 19:35.